Paver sealing for Cedar Hills homes
Paver Sealing in Cedar Hills, FL
Cedar Hills 1950s ranches now sit beside rebuilt riverfront houses; call (904) 830-5386 for a free paver estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Cedar Hills
Paver sealing in Cedar Hills begins with a free estimate from a local contractor who works the Westside. The contractor washes, re-sands and seals driveways, patios and pool decks, from the Blanding Boulevard side to Lane Avenue. Reach out by phone at (904) 830-5386 and expect a reply inside 1 business day, usually sooner.
Cedar Hills is mostly 1950s block ranches, and a good many of the riverfront ones have been rebuilt much bigger. That puts old pavers next to new ones on the same street. Faded drives and weedy patios show up on both. To get a price on yours, you can request your free estimate and describe what you see.
Why hire a local paver sealing contractor in Cedar Hills?
A Cedar Hills street can hold a 1955 ranch and a brand new rebuild side by side, and their pavers need different care. A local contractor can tell them apart quickly, so request your free estimate and ask about yours.
Walk-around first
Someone looks at your Cedar Hills pavers, measures them and names a price. Booking is your call.
A range for comparison
Use the pricing range shown on this page to size up any Cedar Hills bid.
Old and new together
Pavers from a 1950s house and from a recent rebuild call for different cleaning, so each gets its own plan.
Ditch and canal aware
Cedar Hills has a network of ditches and canals. Say where water collects on your lot.
Get Your Free Estimate in Cedar Hills
Tell us about your pavers in Cedar Hills.
Free, no obligation
What paver problems show up most in Cedar Hills?
Long drives that hold tire marks
American Ranch homes here sit behind wide front yards, so drives run long. A Jacksonville company says driveways in full sun may need resealing about every 18 to 24 months. Hot tires, oil and road grime build up across all that length. If your drive has gone gray and blotchy, expect to wash it before anything else, and the sealer to follow. Because Cedar Hills lots have wide front setbacks, the drive is often the longest paved run on the property. The street end of a long drive takes the most turning, so it often shows the wear first.
Ditch water and standing damp
Cedar Hills has a large network of drainage ditches and canals. In 2017 News4JAX reported a blocked ditch sending water onto neighboring lots and collapsing the ground. Pavers near a ditch can stay damp and grow green film. They also settle sooner, and settled pavers are reset before any coat goes on. Look first for a stretch of settled pavers along the ditch side. Resetting a few is cheaper than sealing over a dip.
Sand lost to summer downpours
The USDA describes the Ortega soil series, first mapped in Duval County, as deep sand with rapid permeability. Rain moves through it quickly, and a Jacksonville company says summer downpours flush sand out of unsealed joints. Weeds in your joints are a sign the sand is thin. It is replaced before sealing locks the new sand in. A drive that looks full of sand can still hide thin joints at the edges, where water runs. Photos of the joints near the garage and near the street make a good before-and-after record.
Blotchy sealer from decades of owners
Many Cedar Hills homes date to the 1950s, and a lot of owners have come and gone since. A past coat of sealer may be solvent-based, patchy or peeling. If a solvent-based coat is down, a water-based product cannot be added over it. The contractor tests a small area first, since new coat over failed coat tends to fail again. Patchy shine beside flat gray is the usual sign of an older coat wearing unevenly.
Pool decks that turn slick
Cedar Hills Park has a public pool, and many private yards have their own. A gloss finish can make a deck slick when wet. A Jacksonville company says pool decks often get a penetrating sealer that keeps traction. Ask for a matte or grippy finish near the water. A deck under a screen enclosure can stay damp, so it may need extra washing before the coat. Many private pools in the area sit close to the house, so the deck and the drive are often sealed in the same visit.
Is paver work different in Cedar Hills Estates than along the Cedar River?
Often it is, because the two parts of Cedar Hills grew in different ways. A real estate page lists Cedar Hills Estates homes built from 1955 to 1971, from 910 to 3,248 square feet, with a median year of 1960. Along the Cedar River, many homes have been expanded or replaced with much larger ones. Tell the contractor which part you are in when you request your free estimate.
Cedar Hills is seven neighborhoods, from the Cedar Hills Shopping Center to Jammes Road. Sweetwater, built mostly from 1949 to 1953, has streets named Luke, Matthew and Esther. Storybook streets like Peter Pan Place and Mother Goose Road lie farther east. Call (904) 830-5386 and name your street so the visit is planned around it.
The page lists 21 current Cedar Hills Estates listings with no HOA, so most owners here set their own rules. That means you pick the finish and the date without a vote. If your street does have an association, check its guidelines first. Whichever applies, request your free estimate and share what you know.
What does paver sealing cost in Cedar Hills?
In Northeast Florida, published prices for cleaning, sanding and sealing run $1.75 to $3.25 per square foot. Cedar Hills drives run long, so the square footage adds up even at a fair rate. A Jacksonville company says bigger jobs cost less per foot since setup time spreads out. For a number for the pavers at your house, request your free estimate.
Condition and access move the price inside that range. An old failed coat, deep stains or missing sand add steps. A patio behind a rebuilt riverfront house may mean gear carried through. Call (904) 830-5386 to hear which of these apply to you.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
How does a paver sealing job work in Cedar Hills?
Walk the drive and the ditch line
The contractor starts at the street and walks the full length of the drive, since Cedar Hills ranches sit far back. Along the way the ditch line, the low edges and any settled pavers are noted. A small test patch shows whether an old coat is down, and settled sections are marked for resetting. Photos of the street end of the drive help the contractor plan. Cedar Hills drives are long enough that the contractor may split the work into sections and finish each before moving on.
Wash the tire marks and green edges
Washing removes hot-tire marks, road grime and green film at the damp edges. Oil and rust spots are treated, and a stain that has sunk in deep may stay faintly visible. Rinse water is kept off the brick and block walls of the house. The pavers must be clean for the coat to bond. A drive this long collects more road dust at the street end, so that stretch often gets a second pass. The garage end and the street end are washed separately, since each collects different grime.
Replace the sand rain carried off
Summer downpours flush sand out of unsealed joints, per a Jacksonville company, and washing takes more. The joints are refilled and swept level. Deep Duval County sand lets soil work upward through empty joints, which is how weeds start. A long drive needs plenty of sand and patience. Sand is carried in by the bag and spread along the whole run, which is why the length of the drive matters to the quote.
Wait for the edges to dry
Sealing damp pavers is the usual reason a coat turns cloudy white. Cedar Hills rain falls mostly May to September in short, hard bursts, and ditch-side edges stay wet longer than the middle. The contractor checks those edges before spraying. A dry morning is worth waiting for. Where the drive meets the street, water often pools first, so that apron gets the longest wait.
Spray, roll and park elsewhere
The sealer is sprayed on and rolled into the joints in matte or a wet look. People can walk on it within a few hours, but cars should wait about a day. Ask which stay-off time goes with the product on your job. Matte hides daily tire scuffs better. Mark the stay-off time on a note by the garage door so no one parks on it by habit.
Complete paver services in Cedar Hills
Each Cedar Hills job moves through the same four stages. First the wash takes off tire marks and green film, then fresh sand goes in, then the pavers dry, and finally the sealer goes on. That order keeps dirt from being locked under the coat. To learn how long it takes on a long ranch drive, call (904) 830-5386.
Long driveways, rear patios off the sliding doors and walkways to the front door are the usual surfaces. Pool decks and entries beside the river get extra thought about grip and drainage. Tell the contractor which of these you have when you request your free estimate.
Sealer comes in water-based and solvent-based types, in matte or wet look. An old solvent-based coat decides the type, since the two do not go together. Matte hides scuffs better on a drive that sees daily tires. To pick a finish that fits your house, call (904) 830-5386.
Timing in Cedar Hills follows rain and ditches. After a storm, low edges stay wet longer than the middle of the drive. The contractor may start later in the day or move the job. For a date that fits your yard, request your free estimate.
Questions to ask before you hire
- Do the people working at my house carry workers' comp as well as liability coverage?
- Do you seal the front steps and the porch landing, or only the flat areas?
- Will the orange stains my sprinklers leave on the pavers come back after you clean them off?
- How will I know the sealer is fully cured, not only dry to the touch?
- Will you text me when you are on the way?
- Does sealing my pavers change anything about the paver maker's warranty?
- What would you charge to come back and touch up one spot a year from now?
What do sealed pavers look like around Cedar Hills?
Why local matters in Cedar Hills
Cedar Hills is crisscrossed by ditches and canals, which changes where water sits and how long pavers stay damp. Someone who works the Westside checks the edges as well as the middle. Outsiders often skip that. To find a pro who knows these streets, call (904) 830-5386.
Local work also means knowing the housing mix. About 3,000 ranches went up here in the 1940s and 1950s, and many riverfront ones have since been rebuilt. Their pavers can be seventy years old or two years old. If yours are somewhere in between, request your free estimate and say so.
Cedar Hills is also close to everything, with Cedar Hills Shopping Center, Anchor Plaza and Blanding Boulevard nearby. That makes scheduling easy and travel short. A contractor from the area can be at your house with little notice. Call (904) 830-5386 to ask about the next opening.
What is Cedar Hills known for on Jacksonville's Westside?
It is known for mid-century ranches and storybook street names, built mostly in the 1940s and 1950s. The Cedar Hills Shopping Center opened in 1955 as one of the city's first large shopping districts outside Downtown. The neighborhood was designed for more than 3,000 houses, and ZIP 32210 now counts 66,415 people. If you live near the center, request your free estimate.
Cedar Hills Park has a public pool and a pedestrian bridge to backyards, and the Mary Lena Gibbs Community Center fills the old National Guard armory from 1957. The Cedar River, which locals call Cedar Creek, runs by on its way to the Ortega River. Cedar Hills Elementary School has been serving the area since 1956. If you live near any of these places, call (904) 830-5386 and give your street.
Frequently Asked Questions
Why is paver sealing so expensive in Cedar Hills?
Cost follows labor, sand, wait time and sealer rather than the coat alone. Cedar Hills quotes should sit inside the $1.75 to $3.25 per square foot range Northeast Florida companies publish for clean, sand and seal. Cedar Hills drives are long, so the square footage adds up quickly. Have the total square footage written on the quote.
Which water-based paver sealer works well on a Cedar Hills driveway?
Get the product name, and find out if a solvent-based coat is already down. A water-based product will not go onto a solvent-based coat. A Jacksonville company says the sealer is sprayed on and then rolled into the joints.
How long does paver sealing last in Cedar Hills?
The span companies commonly quote is two to five years between coats. A Jacksonville company says full-sun driveways may need work about every 18 to 24 months, and shaded walks last longer. Water that beads up means the coat is working.
How much does it cost to have pavers cleaned and sealed in Cedar Hills?
Budget $1.75 to $3.25 per square foot, the span Northeast Florida companies post for cleaning, sanding and sealing. Long Cedar Hills drives raise the total, not the rate. Larger jobs cost less per foot, since setup time spreads out.
Can pavers beside a Cedar Hills ditch be sealed?
Yes, once they are clean, reset if settled, and fully dry. Ditches keep nearby ground damp, so the contractor may pick a dry week. Mention any spot where water collects when you ask for a quote.
Does a Cedar Hills pool deck need a special sealer?
Often yes. A Jacksonville company says pool decks commonly get a penetrating sealer that keeps traction when wet. Matte or an anti-slip additive are the usual asks.
Can I seal over old sealer on my Cedar Hills pavers?
Not always. Water-based sealer cannot go over solvent-based sealer, and new coat over failing coat tends to fail again. The contractor tests a small area first.
How soon after rain can my Cedar Hills pavers be sealed?
Wait until the surface is fully dry. Sealing damp pavers is the usual cause of cloudy white sealer, per a Jacksonville company. In summer that can mean waiting a day or two.
What finish looks right on a 1950s Cedar Hills ranch?
Natural matte keeps pavers quiet beside brick or block walls, and it hides scuffs better than a wet look. A wet look deepens color but shows wear sooner. Ask for a small sample patch before you commit to the whole Cedar Hills driveway.
Can a long Cedar Hills driveway be sealed in one day?
Usually, yes. Jax Exterior Cleaning says most driveways are cleaned, sanded and sealed in one day, with cure time after. An extra long drive, heavy weeds or a wet forecast can stretch that. Ask the contractor for a time frame when you get the quote.
My Cedar Hills riverfront house was rebuilt. When can the new pavers be sealed?
One Jacksonville firm suggests a 30 to 60 day wait after installation before the first coat. New pavers need time to settle and the surface should be clean and dry. Ask your builder for the install date.
Do drainage ditches change the price of sealing in Cedar Hills?
Not directly, since the price follows area and condition. Settling near a ditch can add a reset, and damp edges may add drying time. Mention the ditch when you ask for a quote.
Ready for a Free Estimate in Cedar Hills?
Call (904) 830-5386 and tell us about your pavers.
Free, no obligation